I recently bought a BBAI board. I did not use any beagle board before. After connecting the board to a 64 bit 8.1 PC I tried to connect to 192.168.7.2 with no luck.
Device manager shows four new devices. One of the devices is BEAGLEBONE under portable devices and is working properly. I can access the BeagleBone Getting Started volume in the windows explorer too. Two of the devices are "CDC ECM" and "CDC Serial" under Other Devices. For both of the devices Device manager reports "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device.". Windows fails to update the driver. Neither automatic search nor browsing the BeagleBone volume helped. I also downloaded the recent Getting Started volume contents from https://github.com/jadonk/beaglebone-getting-started. It did not help either. The last device is Remote NDIS Compatible Device under Network Adapters. Its status says "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". I tried all mentioned above for this one too. Windows, instead of failing, determines that the driver is up to date. But the status of the device stays the same. I tried the board in a 64 bit windows 7 PC. There, CDC ECM and CDC Serial are again failing, but a properly working RNDIS device shows. And the PC can connect to 192.168.7.2 and Cloud9 IDE interface. But I cannot use this PC permanently. Can anyone help me to resolve this? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9381f135-fd42-49a6-9c10-4a788a97b053o%40googlegroups.com.
