Thanks for your help On Thursday, August 13, 2020 at 1:14:02 PM UTC-4 [email protected] wrote:
> I'm off work today so I can't say exactly what versions I was using, but I > recall following the instructions verbatim and everything worked perfectly. > > I suppose if your modifications to the u-boot source were bad enough, you > could cause boot to fail. If I recall correctly, I started by allowing the > blank eeprom case to follow the black boot path. That seemed easiest to get > started and I think it just added an OR to an if statement. > > Figuring out what's happening without a serial debug port is feeling > around blind. If you're not getting paid for it, it's not so bad, but it > wastes a lot of time. No way could I do that at work. > > Good luck. > > On Thu, Aug 13, 2020, 1:07 PM Joshua Park <[email protected]> wrote: > >> Were you using u-boot version 2018.03rc1 when you made it work? That is >> the only thing that I had to change when following pocket beagle image >> tutorial <https://www.digikey.com/eewiki/display/linuxonarm/PocketBeagle> >> since the 0002-NFM-Production-eeprom-assume-device-is-BeagleBone-Bl.patch >> provided in the blank board ID method is written for that version. In case >> I made a mistake somewhere I will go back and try again. >> >> On Thursday, August 13, 2020 at 12:31:48 PM UTC-4 [email protected] >> wrote: >> >>> It should work on an original pocket beagle. Like I told Sam Park in a >>> separate thread, you basically must have a serial debug adapter connected >>> to the device to debug u-boot issues. >>> >>> I can say that I have followed rcn's instructions for building and >>> installing u-boot and followed octavo's directions for modifying a board >>> with a blank eeprom, and things worked perfectly, for me. >>> >>> Good luck! >>> >>> On Thu, Aug 13, 2020, 11:12 AM Joshua Park <[email protected]> wrote: >>> >>>> >>>> Hi all, >>>> >>>> I'm currently working on a project involving a custom SBC based off the >>>> Pocket Beagle. I'm in the process of building a image for it and I am >>>> trying to utilize a blank board ID mentioned here: >>>> https://octavosystems.com/app_notes/osd335x-eeprom-during-boot/. >>>> However upon testing, I found out that the image for some reason does not >>>> boot on the original Pocket Beagle. Why is this the case? As far as I >>>> know, >>>> utilizing a blank board ID is not the recommended way to boot however I >>>> don't see why it shouldn't boot with the original Pocket Beagle. Thanks. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/1715f20d-48b4-4a31-b330-b950ccad2059n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/beagleboard/1715f20d-48b4-4a31-b330-b950ccad2059n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/4eeffa58-5a80-429a-a9e0-bf32f1800182n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/4eeffa58-5a80-429a-a9e0-bf32f1800182n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/01981b6b-6832-4226-b0eb-48ce47396988n%40googlegroups.com.
