The power supply is on all the time. I just switch the 5V on/off with a switch. After switching on, the power LED is not on. If I then press the Power button, the power LED switches on and the board boots.
Dennis Lee Bieber <[email protected]> schrieb am Fr., 17. Juli 2020, 20:22: > On Fri, 17 Jul 2020 08:22:59 -0700 (PDT), in > gmane.comp.hardware.beagleboard.user > [email protected] wrote: > > > >switches off but if I then switch off and switch on the 5V power (via the > >barrel jack), the board does not boot up again. Only after I manually > press > >the power button it boots again. Is there a way to configure it to boot > >without a manual key press once power is back? > > Possibly your 5V power supply is not coming on in a way that the > on-board distribution system is detecting it correctly. Does the power LED > come on? > > My revC with a 5V 2A wall-wart supply, stuck into a wall socket > controlled with a lamp switch, powered up nicely when I flipped the wall > switch. > > > -- > Dennis L Bieber > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/h5q3hf9pbsmdctggcmrpp882dc888ncbag%404ax.com > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHP2pF_vy8unwHuFQGzz7HzQEivgJasO%2B8-cpGX7Yiyd_XKBDw%40mail.gmail.com.
