At Fri, 17 Jul 2020 15:39:50 +0100 [email protected] wrote:

> 
> Using USB power supply, 5V 2A

I don't think that might work well.  You might do better to use the Coax jack 
instead.  *Technically* the USB is only good for 500MA, per the USB spec.  I 
don't know if the BBB imposes that limit or not. 

> 
> 
> Le ven. 17 juil. 2020 à 14:35, Robert Nelson <[email protected]> a
> écrit :
> 
> >
> >
> > On Fri, Jul 17, 2020 at 8:29 AM Jawhar Ben Njima <
> > [email protected]> wrote:
> >
> >> Hi ,
> >>
> >> Actually, we are using black beaglebone to embed our custom software
> >> solution.
> >> Following a production deployment, we have noticed that the black
> >> beaglebone is freezing after a random operating time.
> >> After such behavior, the beaglebone is no longer connected to the
> >> local network, as well as to the internet.
> >> Log analysis for /var/log/kern.log has shown that "bootloader does not
> >> support rtc-only!" and "PM: Hibernation image not present or could not be
> >> loaded.". Please, find attached the logs.
> >> This disconnection is critical for the stability of our project. It
> >> required some pertinent feedback ASAP.
> >> Could you please check the logs and give us a detailed answer about the
> >> cause & fix that needs to be done ?
> >>
> >> Thank you
> >>
> >
> > It helps to attach teh log file, stick a usb-serial adapter on J1 and
> > please log the serial console, as u-boot will dump reset reasons.  How are
> > you powering the board? USB or 5VDC?
> >
> > Regards,
> >
> > --
> > Robert Nelson
> > https://rcn-ee.com/
> >
> 

-- 
Robert Heller             -- 978-544-6933 Cell: 413-658-7953 GV: 978-633-5364
Deepwoods Software        -- Custom Software Services
http://www.deepsoft.com/  -- Linux Administration Services
[email protected]       -- Webhosting Services
                                                                                
                                           

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/20200717160003.D76A522387A%40sharky4.deepsoft.com.

Reply via email to