Hello folks, Hope everyone has been well.
I recently was flashing my BB Wireless (SD -> eMMC) and mid-flash lost power to the device. After power cycling, the BeagleBone was still able to flash properly.. or so it seemed. Now when I go to create a new image for production purposes (eMMC -> SD) using the tool: */opt/scripts/tools/beaglebone-black-eMMC-flasher.sh* I get the following error: *Error: script halting, system unrecognized...* I was running this script no problem prior to the power outage fiasco. I am assuming there is something corrupted with uBoot which is causing this issue. Is there any way to completely clean the BB and bring it back to a recognized state. Perhaps something along the lines of: *sudo dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=1*. Unfortunately, this destructive command even did not do the trick.. Thanks, Robert -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/203ee2de-af54-4193-ada4-9ef075fbcb8co%40googlegroups.com.
