On Mon, 30 Mar 2020 15:22:39 -0700 (PDT), in gmane.comp.hardware.beagleboard.user Mala Dies <[email protected]> wrote:
>Hello, > >Seth here again... > >Okay. Here are the links to what I have currently in my possession. > >https://github.com/beagleboard/capes/tree/master/beaglebone/Relay > >... > >https://shop.advanceautoparts.com/p/sylvania-3157-white-syl-led-mini-bulb-pack-of-2-3157slbp2/11137537-p?product_channel=local&store=8598&adtype=pla&product_channel=local&store_code=8598&gclid=Cj0KCQjwjoH0BRD6ARIsAEWO9Dto3PIICpZ7V7Q_cCqa8kLvBBYKnt9IQFolOQlDKFLqSOQ_VvFkS10aArABEALw_wcB&gclsrc=aw.ds > >Sorry for the long link. > >Seth > >P.S. As you can see on the LED, it is near impossible, w/out soldering, to >connect wiring. And yes sir, I am using the RelayCape from GHI. > Recommend you obtain a collection of jumper wires with small alligator clips... https://www.adafruit.com/product/1008 (double-ended) https://www.adafruit.com/product/3448 (single-ended, for breadboard sockets) Unfortunately, the web site doesn't give enough information to tell which side of the LED is GND and which is V+. I'm presuming the base is polarized to fit some sort of automotive socket, but would then need to see such a socket and how it is wired... -- Dennis L Bieber -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/74758f14s8a8fqq7ur7m13tqr9hcvv4ak9%404ax.com.
