{Blast -- my original response went to the dead submittal route, a belated
resend}On Sun, 15 Dec 2019 23:00:05 -0800 (PST), in gmane.comp.hardware.beagleboard.user ags <[email protected]> wrote: > >bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot >2019.04-00002-gbb4af0f50f]:[location: dd MBR] > >bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot >2016.11-rc3-00002-g73df7f]:[location: dd MBR] > That's getting rather old... When was the last time you reflashed the entire eMMC? Does the board behave differently if you hold the boot-select button down while applying power? (I believe the eMMC u-boot is used even if it later transfers to the SD card for actual OS unless the boot-select was held; then it uses the SD card u-boot for everything) I don't have the wireless, but... debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh [sudo] password for debian: eeprom:[A335BNLT000C0615BBBK0412] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2019-08-03] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-gbb4af0f50f]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-gbb4af0f50f]:[location: dd MBR] kernel:[4.14.108-ti-r113] ... I tend to flash the eMMC whenever a new "standard" release shows up on http://beagleboard.org/latest-images (given how fat the LXQT image is, I think I've started using the IoT image for eMMC and reserve the LXQT image for SD cards). -- Dennis L Bieber -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/72ggvetqa2uhticmr3ppm6o9ih1pom8g7p%404ax.com.
