There were some similar issues a few years ago that were resolved. If you are running three or four year old software, you might have the disease. If you are running recent recommended release version of Debian, then no reports of issues. Make sure you have a clean, reliable power source.
--- Graham == On Monday, November 18, 2019 at 8:23:07 AM UTC-6, Ilia Lotosh wrote: > > Hi! > > I have a BeagleBoneBlack rev C. powered via cape pins (the cape is a > custom board which takes 12v power and converts it to 5v to power the > beaglebone). It consistently boots up ok (never experienced an ethernet PHY > issues that others report). > The board runs a simple python script that exposes a TCP server and allows > sampling GPIO pins. > > Everything works fine for hours, until after ~50 hours (not consistent, it > takes between 40 and 50 hours to reproduce) the board freezes - stops > responding via network, LEDs stop blinking. After a repower the board gets > back to normal for another ~40 hours. During these tests the board sits in > a closed box. > > When the cape is connected to another power supply and sits on my desk, > there is no problem whatsoever - it keeps running for at least a week > without issues. > > Did anyone encounter a similar issue? Or has any leads on how to > investigate this? > > Thanks! > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8a17b81f-93f1-4cc8-b763-57dc550f240a%40googlegroups.com.
