On Tuesday, September 17, 2019 at 4:17:33 PM UTC-5, Dennis Lee Bieber wrote: > > On Tue, 17 Sep 2019 11:25:20 -0700 (PDT), amf > <[email protected] <javascript:>> declaimed the > following: > > > > >Is this a typo? should be 'wifi on' > >#connmanctl> tether wifi off > > > Under stood, but why is he using connmanctl for eth0?
> The OP stated "BeagleBone Black" -- the base BBB does not have > WiFi > > >The 'auto eth0' should not be commented out, unless you are not using a > >connected ethernet cable > ># auto eth0 > >iface eth0 inet static > > > And my BBB shows: > > debian@beaglebone:~$ cat /etc/network/interfaces > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > #auto eth0 > #iface eth0 inet dhcp > # Example to keep MAC address between reboots > #hwaddress ether DE:AD:BE:EF:CA:FE > > IE: both lines for eth0 are commented out -- works fine with a DHCP router > (which is why I'm suspicious of setting a static mode in the file; like > something is set up before the file is processed) > > debian@beaglebone:~$ ifconfig > eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 > inet 192.168.1.69 netmask 255.255.255.0 broadcast 192.168.1.255 > inet6 2600:1700:e630:890:d239:72ff:fe18:3ee5 prefixlen 64 > scopeid > 0x0<global> > inet6 fe80::d239:72ff:fe18:3ee5 prefixlen 64 scopeid 0x20<link> > inet6 2600:1700:e630:890::44 prefixlen 64 scopeid 0x0<global> > ether d0:39:72:18:3e:e5 txqueuelen 1000 (Ethernet) > RX packets 103 bytes 19904 (19.4 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 145 bytes 20821 (20.3 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > device interrupt 55 > > > > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] <javascript:> > http://wlfraed.microdiversity.freeddns.org/ > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/59f71fb1-8d36-4928-b90d-e47a3d14c393%40googlegroups.com.
