Am Mittwoch, 3. Juli 2019 17:06:30 UTC+2 schrieb LuminousShadow: > > Yes you can. By creating the device tree binary overlay you can not only > set the mux mode, but its output as well. > > I'll add another resource that explains this: > > http://derekmolloy.ie/gpios-on-the-beaglebone-black-using-device-tree-overlays/ > (basically > a walk-through on how to do it. However, its a bit outdated as "SLOTS" are > obsolete). >
Nonsens! This is good, but obsolete stuff. Nothing about PWM output from an eCAP module. Only about GPIO, using sysfs to manipulate the settings. >From a device tree blob you cannot manipulate the register settings unless the driver supports this. And the PWM driver has no such feature, yet, Regards -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b09b1007-1df6-4345-8856-865024d47bd6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
