On Tuesday, June 4, 2019 at 2:53:18 AM UTC-5, Satz Klauer wrote: > > I recently got an information about this: https://halaser.de/e1701c.php > > It is a 5-axis CNC controller which can be used together with a mill or a > laser. It obviously is a BeagleBone with a cape - but to be honest I have > no idea if this cape can be bought separately and if it runs with a normal > Linux. But may be somebody is interested in this... > > Well, there is also Machinekit, a complete packaged system with Linux, real time options and a variant of LinuxCNC all in one downloadable distribution. You get I/O pins that have the step and direction outputs at 3.3 V, but there is a CRAMPS board available that brings all this out in a more convenient form. You can run up to 6 coordinated axes with machinekit.
Jon -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/94734498-002a-4321-a360-9dc094af281f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
