Dear Jairo, How many Beaglebone Black Wireless have you used in your mesh-network? Maybe 3 or 5 ? 10 is already maximum limit.
Thank you. On Thursday, March 7, 2019 at 7:46:52 PM UTC+3, [email protected] wrote: > > I was able to setup a mesh wifi network, but I did so with 802.11s, not > BATMAN or OSLR. This does not require you to set the device in ad-hoc mode. > It works out of the box on the BeagleBone Black Wireless with Debian 9.5 > (Linux 4.14.71-ti-r80). I did the setup with the command line tool "iw". > Additional details here: > https://e2e.ti.com/support/processors/f/791/t/780010 > > On Monday, January 28, 2019 at 3:37:48 PM UTC-6, don_wrt wrote: >> >> Hello, >> >> I wonder that what happens when I try to reach to a node where it is in >> non-line of sight position for me. I have to make some number of 'hops' >> over nodes in my line of sight to reach to non-line of sight node for me. I >> wonder that, if ad-hoc is not supported, can I reach to node where it is in >> the non-line of sight position for me in a mesh - networking by using BBBW? >> >> Best Regards >> >> On Mon, Jan 28, 2019 at 11:09 PM <[email protected]> wrote: >> >>> To add a little bit of background to this; >>> >>> There are several posts on TI's e2e forum stating that ad-hoc mode is no >>> longer supported. In TI's use cases ad-hoc was replaced by Wi-Fi Direct. >>> http://e2e.ti.com/support/wireless-connectivity/wifi/f/968/t/367550 >>> >>> TI supported 802.11s meshing (http://open80211s.org/) in the last >>> driver release family (R8.7) >>> >>> http://software-dl.ti.com/ecs/WiLink8/R8_7/exports/release_notes_R8_7.html >>> I have used that in builds from the TI SDK in the past. >>> >>> However, in this post someone talks about getting the TI open80211s mesh >>> working in a Debian based release >>> http://e2e.ti.com/support/wireless-connectivity/wifi/f/968/t/635441 >>> >>> I'd never actually heard of BATMAN before these questions. A quick scan >>> of the documentation suggested that it could also work using AP+STA or >>> AP+AP modes which are standard modes for the Wilnk8. >>> Iain >>> >>> >>> >>> >>> On Monday, January 28, 2019 at 6:57:06 AM UTC, don_wrt wrote: >>>> >>>> Hello All, >>>> >>>> I have read a post that is "Beaglebone Black Wireless's Wilink8 driver >>>> does not support the *ad-hoc* mode mesh networking anymore". That is >>>> true? I think that Beaglebone black wireless cannot do below things, if >>>> it >>>> does not support the ad-hoc mode; >>>> >>>> *BBBW cannot find the "best path" for routing packets in a mesh network >>>> over multiple hops? >>>> *How can be determined the effective number of hop count, if ad-hoc is >>>> not supported? >>>> *BBBW cannot do self-forming of topology when some nodes fall the >>>> non-line of sight position? (it cannot change topology dynamically) >>>> >>>> If above functions are able to perform with BATMAN or OLSR only, >>>> without support of ad-hoc mode? >>>> >>>> Best Regards, >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/d82614f9-8529-4b2c-8a34-387111b19397%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/beagleboard/d82614f9-8529-4b2c-8a34-387111b19397%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/22ef90cb-f39f-4b70-9c02-944546adc43f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
