Hello all, I am currently working on implementing this project :
http://www.ti.com/lit/ug/tiduci9c/tiduci9c.pdf I am using a Beagle Bone black wireless instead of the Beagle Bone black, and I am using a CC1310 Microcontroller from TI. Now , I am currently working on the following section in the above link: 3.1.2.1 BeagleBone Black SD Card. Here are the steps stated in that sections: 1. Download the prebuilt TI Linux processor SDK SD card image am335x-evm-linux-xx.xx.xx.xx.img.zip from http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/index_FDS.html (where xx.xx.xx.xx is the version number of the latest Linux Processor SDK). 2. To program the micro SD memory card, see the instructions in Processor SDK Linux Creating an SD Card with Windows When I navigate to link to try and find the correct image , I fould the one below to be the right one: am335x-evm-linux-05.02.00.10.img.zip <http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/exports/am335x-evm-linux-05.02.00.10.img.zip> Only used when creating an SD Card on Windows 1051208KHowever, the image is even over 16GB , and in the hardware requirements they say that 8gb MicroSD card is required. Is the above image the right one for this assignment? In case it is , then an 8GB MicroSD card is not big enough as specified in the assignment. If this is not the image I should be using , I would like some help please to find out which one it is. Thanks a lot. Neil Mustafa. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/13703df0-820c-4799-9177-090646825f68%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
