Hi Jeff,
Is there any chance that you have any of the expansion boards you made
for sale? I'd be interested in purchasing at least 4 of them if that's a
possibility.
Thank You.
On Thursday, April 12, 2018 at 9:22:23 AM UTC-4, Jeff Andich wrote:
> We made our own PCBA expansion board using this connector. It only breaks
> out only 30/60 of the signals and has a single layer, so high speed signals
> might be an issue. Also, the mating hirose connector is reversed 180
> degrees with respect to the connector on the BB-X15... The mating
> connector is keyed, so if you're placing the connector on a PCBA, with
> fixed connections to the pins on the connector, then be sure to flush this
> out beforehand.
>
>
>
> On Thursday, April 12, 2018 at 8:05:23 AM UTC-5, Jeff Andich wrote:
>>
>> Also,
>>
>> I think there are 2-3 variants of the mating hirose connector. I believe
>> the differences are in the "heights" of the connector variants, so you may
>> need to take that into account as well..
>>
>>
>> On Thursday, April 12, 2018 at 7:56:57 AM UTC-5, Jeff Andich wrote:
>>>
>>> We made our own PCBA expansion board using this connector. It only
>>> breaks out only 30/60 of the signals and has a single layer, so high speed
>>> signals might be an issue. Also, the mating hirose connector is reversed
>>> 180 degrees with respect to the connector on the BB-X15...
>>>
>>>
>>>
>>> On Thursday, April 12, 2018 at 7:50:31 AM UTC-5, Jeff Andich wrote:
>>>>
>>>>
>>>> https://www.digikey.com/products/en/connectors-interconnects/20?keywords=FX18-60S-0.8SV15+&pkeyword=FX18-60S-0.8SV15+&v=26
>>>>
>>>>
>>>> I wish the distributors (Digikey, Mouser, etc) of the BB-X15 would list
>>>> this on the same page as the BB-X15...
>>>>
>>>>
>>>>
>>>>
>>>> On Thursday, April 12, 2018 at 7:12:21 AM UTC-5, kamesh wrote:
>>>>>
>>>>> Hello Gerald,
>>>>>
>>>>> Thanks for your mail. I tried to search for that connector, but could
>>>>> not find it. Hence I am posting it here.
>>>>>
>>>>> The Beagle board has FX18‐60P‐0.8SV connector. A suitable receptacle
>>>>> for that is FX18-60S-0.8SV15. To get access to GPIO pins to do some
>>>>> LED blinking for example, I would need FX18-60S-0.8SV15 to some sort
>>>>> of a GPIO expansion header. I could not find such a thing. Do you have
>>>>> any recommendation for that type of a connector?
>>>>>
>>>>> Thank again,
>>>>> Naveen
>>>>>
>>>>> On Thu, Apr 12, 2018 at 12:56 PM, Gerald Coley <[email protected]>
>>>>> wrote:
>>>>> > All you need is a connector that plugs into the connector on the X15
>>>>> that
>>>>> > connects it to whatever connector you like. A schematic would
>>>>> connect the
>>>>> > pins together in whatever order you like.
>>>>> >
>>>>> >
>>>>> >
>>>>> > Gerald
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > From: [email protected] [mailto:[email protected]]
>>>>> On
>>>>> > Behalf Of kamesh
>>>>> > Sent: Thursday, April 12, 2018 3:52 AM
>>>>> > To: BeagleBoard <[email protected]>
>>>>> > Subject: Re: [beagleboard] Re: X15 - any expansion boards for GPIO
>>>>> access?
>>>>> >
>>>>> >
>>>>> >
>>>>> > Hello Gerald,
>>>>> >
>>>>> > Do you have the schematics of the breakout board for accessing
>>>>> GPIO's
>>>>> > somewhere in github? I would like to design my own adapter board
>>>>> with
>>>>> > matching connectors for my experiments.
>>>>> >
>>>>> > Thank you very much for your time.
>>>>> >
>>>>> > Best
>>>>> > Naveen
>>>>> >
>>>>> > On Monday, November 13, 2017 at 11:45:39 PM UTC+1, gcoley1 wrote:
>>>>> >
>>>>> > I have something, but not tested. Not sure when I can get to it.
>>>>> >
>>>>> >
>>>>> >
>>>>> > Gerald
>>>>> >
>>>>> >
>>>>> >
>>>>> > From: [email protected] [mailto:[email protected]]
>>>>> On Behalf
>>>>> > Of Jeff Andich
>>>>> > Sent: Monday, November 13, 2017 4:42 PM
>>>>> > To: BeagleBoard <[email protected]>
>>>>> > Subject: [beagleboard] Re: X15 - any expansion boards for GPIO
>>>>> access?
>>>>> >
>>>>> >
>>>>> >
>>>>> > Hi,
>>>>> >
>>>>> >
>>>>> >
>>>>> > I cannot find the post, but a few months ago, I asked if there was a
>>>>> > breakout board planned for the 4 expansion headers on the X15. I
>>>>> THINK
>>>>> > Gerald responded by indicating that he had something already
>>>>> designed, but
>>>>> > that he hadn't yet had the chance to release it and get it into the
>>>>> > production pipeline.
>>>>> >
>>>>> >
>>>>> >
>>>>> > I'm sure that if there are any updates to that status, the
>>>>> BeagleBoard folks
>>>>> > will update everyone on this forum accordingly.
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > On Sunday, November 12, 2017 at 4:36:11 PM UTC-6, David Stein wrote:
>>>>> >
>>>>> > I purchased an X15 for a project that involves, in part, driving
>>>>> three or
>>>>> > four LEDs and detecting some simple button-presses. I've been
>>>>> planning on
>>>>> > using the GPIO pins, and of course the X15 has plenty - but they're
>>>>> > accessible through a surface-mounted expansion port.
>>>>> >
>>>>> >
>>>>> >
>>>>> > It looks like I'll need a breakout board to provide header pins. I'm
>>>>> not
>>>>> > finding anything directly relevant.
>>>>> >
>>>>> >
>>>>> >
>>>>> > Here's what I've found:
>>>>> >
>>>>> >
>>>>> >
>>>>> > * Some posts from 2015 about the need for such a board soon after
>>>>> the X15
>>>>> > was released, but apparently no follow-up.
>>>>> >
>>>>> >
>>>>> >
>>>>> > * A post identifying the connector type for the expansion ports
>>>>> (Hirose
>>>>> > FX18-60S-0.8SV15), and some ancillary discussion of breakouts that
>>>>> > referenced a PCI-e TI expansion board (AMxxxx?), but the
>>>>> conversation kind
>>>>> > of petered out without resolution.
>>>>> >
>>>>> >
>>>>> >
>>>>> > And... that's about it. Anyone have other info? Thank you for your
>>>>> help.
>>>>> >
>>>>> > --
>>>>> > For more options, visit http://beagleboard.org/discuss
>>>>> > ---
>>>>> > You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> > "BeagleBoard" group.
>>>>> > To unsubscribe from this group and stop receiving emails from it,
>>>>> send an
>>>>> > email to [email protected].
>>>>> > To view this discussion on the web visit
>>>>> >
>>>>> https://groups.google.com/d/msgid/beagleboard/8a6320f8-6a6d-4ebd-b8c9-ae9e4b522f48%40googlegroups.com.
>>>>>
>>>>>
>>>>> > For more options, visit https://groups.google.com/d/optout.
>>>>> >
>>>>> > --
>>>>> > For more options, visit http://beagleboard.org/discuss
>>>>> > ---
>>>>> > You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> > "BeagleBoard" group.
>>>>> > To unsubscribe from this group and stop receiving emails from it,
>>>>> send an
>>>>> > email to [email protected].
>>>>> > To view this discussion on the web visit
>>>>> >
>>>>> https://groups.google.com/d/msgid/beagleboard/da99cf85-59f5-49c6-9006-3b72277e263d%40googlegroups.com.
>>>>>
>>>>>
>>>>> > For more options, visit https://groups.google.com/d/optout.
>>>>> >
>>>>> > --
>>>>> > For more options, visit http://beagleboard.org/discuss
>>>>> > ---
>>>>> > You received this message because you are subscribed to a topic in
>>>>> the
>>>>> > Google Groups "BeagleBoard" group.
>>>>> > To unsubscribe from this topic, visit
>>>>> >
>>>>> https://groups.google.com/d/topic/beagleboard/Bjftz6CpHZ4/unsubscribe.
>>>>>
>>>>> > To unsubscribe from this group and all its topics, send an email to
>>>>> > [email protected].
>>>>> > To view this discussion on the web visit
>>>>> >
>>>>> https://groups.google.com/d/msgid/beagleboard/2d348677e5164e2ca0532a59039a6730%40winhexbeus11.winus.mail.
>>>>>
>>>>>
>>>>> >
>>>>> > For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Kameswar Rao Vaddina,
>>>>> Postdoctoral researcher,
>>>>> Department of Computer and Information Science (IDI),
>>>>> Norwegian University of Science and Technology.
>>>>>
>>>>> Web : http://folk.ntnu.no/kameswav/
>>>>> E-mail <http://folk.ntnu.no/kameswav/E-mail> : [email protected]
>>>>> Mobile : +358 440992996
>>>>>
>>>>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/1097c755-314c-450b-83f0-9640afee46cc%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
