Yes.
Here is the UART log when booting up:
U-Boot SPL 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500)
Trying to boot from MMC1
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
Failed (-5)
U-Boot 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500), Build:
jenkins-
github_Bootloader-Builder-47
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: Internal.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
Failed (-5)
Model: BeagleBoard.org PocketBeagle
<ethaddr> not set. Validating first E-fuse MAC
Net: usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335PBGL] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
2086 bytes read in 67 ms (30.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.14.49-ti-r54 ...
10453504 bytes read in 713 ms (14 MiB/s)
loading /boot/dtbs/4.14.49-ti-r54/am335x-pocketbeagle.dtb ...
124183 bytes read in 130 ms (932.6 KiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo ...
3513 bytes read in 520 ms (5.9 KiB/s)
loading /boot/initrd.img-4.14.49-ti-r54 ...
4034122 bytes read in 319 ms (12.1 MiB/s)
debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4
rootwait c
oherent_pool=1M net.ifnames=0
quiet] ...
debug: [bootz 0x82000000 0x88080000:3d8e4a 88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fc27000, end 8ffffe4a ... OK
reserving fdt memory region: addr=88000000 size=7f000
Loading Device Tree to 8fba5000, end 8fc26fff ... OK
Starting kernel ...
[ 0.001516] timer_probe: no matching timers found
[ 0.614027] dmi: Firmware registration failed.
[ 1.112814] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 1.303794] omap_voltage_late_init: Voltage driver support not added
[ 1.990560] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_wait_vrise (80,
<SessEnd),
retry #3, port1 0008010c
Debian GNU/Linux 9 beaglebone ttyS0
BeagleBoard.org Debian Image 2018-06-17
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
default username:password is [debian:temppwd]
beaglebone login: debian
Password:
Last login: Mon Aug 6 22:12:03 UTC 2018 on ttyS0
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
debian@beaglebone:~$
On Sat, Sep 8, 2018 at 2:05 PM Pablo Rodriguez <[email protected]>
wrote:
> Hi. The schematic of the USB0 is the same as they pocket?
>
> El sáb., 8 de sep. de 2018 2:15 PM, An Ra <[email protected]> escribió:
>
>>
>> Hi all,
>>
>> I have a custom board (based on PocketBeagle design). I was able to flash
>> the EEPROM and it boots up normally and I have access to the Linux command
>> Line through UART0 interface. However, the board doesn't show up as a USB
>> device as the PocketBeagle does.
>>
>> Any ideas how to solve this issue?
>>
>> Regards,
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/c7212090-ca58-4196-9063-1cd05e355903%40googlegroups.com
>> <https://groups.google.com/d/msgid/beagleboard/c7212090-ca58-4196-9063-1cd05e355903%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAEObdD1yPX_z4CVrmO3AbsZ0F93t4833RQ56ic%3DUz7rwDCP3Bw%40mail.gmail.com
> <https://groups.google.com/d/msgid/beagleboard/CAEObdD1yPX_z4CVrmO3AbsZ0F93t4833RQ56ic%3DUz7rwDCP3Bw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAJPgcaVzNNvCMqgKTxDreyO4AgzYbXUKL%3Dv14qPjy83EWOFjKg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
