On Fri, Sep 7, 2018, 6:22 AM An Ra <[email protected]> wrote: > > Hello, > > I am trying to boot up my custom board by bypassing the board ID check. > Therefore, I am following this guide to update u-boot and install it on a > microSD card that has Debian Stretch IoT 9.4. > All the steps till step 6 worked fine. So, I was able to build the new > u-boot. The lsblk command showed that my memory card is called 'sdd'. > > After typing: > > $ export DISK=/dev/sdd > $ sudo dd if=./u-boot/MLO of=${DISK} count=1 seek=1 bs=128k > > This showed up: > dd: failed to open './u-boot/MLO': Not a directory > > Any ideas how to solve this issue? >
Yeah, I'd start by looking at the screen.. is MLO in a directory called u-boot? Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYihD_UDD69GTuEJDGdzLgpbP%3Dd9MKvA1LmwZxrX58Vt6w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
