Hello,
I am using NHD-7.0CTP-CAPE with BeagleBone Black with UBUNTU 14.04 Kernel 3.15 (image supported by NewHaven). Ubuntu is running from SD Card and I would like to flash the image to eMMC. I’ve tried to use some sripts, but no one them worked out: https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh Did anybody manage to flash the eMMC on Ubuntu 14.04? Thanks, Márcio Em terça-feira, 26 de agosto de 2014 19:14:39 UTC-3, [email protected] escreveu: > > Supposedly just holding the boot button down flashes the OS from the SD > card to the eMMC? I tried this, and I left the board for ages and nothing > happened. I tried it again, holding the button longer. Simply nothing > happens. No feedback from the LEDs - they just flash as they normally do. > > I've got a 32GB sd card with Ubuntu 14.04 on it. The partition size is > 30GB but I'm using 1.7GB. So, my goal is to copy over the contents, ideally > without having to reinstall anything - I have software installed that took > all day to build (gstreamer) and I had to delete the source directory to > trim down to below 2GB. > > Anyway, frustrating because the wiki seemingly lied to me. There's no > available documentation on this flashing feature if it exists. > > How can I flash it over? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fbb8b7da-4bf1-4d23-b4de-68d79cc847bf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
