Thanks for the reply. I don't have any problems setting up the wifi for myself, but I'd like to have others be able to set it up easily from their phone, connect to a name that describes my project, and have my own setup screen come up for the wifi config.
Turns out the image that comes with the beaglebone green is pretty old and I couldn't figure an easy way to configure my own AP name on that image. Configuring AP name on Jessie and Stretch is easy. I'd prefer Stretch but apparently the seeed-studio bone101 stuff has been ported to Jessie, but not Stretch. There was also something about giving users access to root with bone101 which I needed to dig into. It all turned out to be less straight forward than I expected so I put it off for a while. On Friday, March 16, 2018 at 12:43:20 PM UTC-6, Mala Dies wrote: > > Hello...I am not sure if you want to exit out of your set-up screen for > WiFi or not. But, in hindsight, I just use connman to set up WiFi instead > of using the interface that is provided by Seeed-Studio. > > Seth > > P.S. connmanctl is the cmd to use and then you can find more on it. If you > just want access to WiFi w/ connmanctl, let me know. > > On Monday, March 5, 2018 at 10:29:06 AM UTC-6, Richard wrote: >> >> >> Does anyone know what files I would edit to change the BBGreen Wireless >> Access Point Name and the WIFI Setup Page? (Debian img 2016-06-14) >> >> Thanks! >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/933370af-2f3a-43cc-991d-5717ef4dc779%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
