Thank you very much!  The voltage limit was a concern. 

- Shannon
Sent: November 10, 2017 12:54 PM
Subject: [beagleboard] Re: battery power for PocketBeagle?

Pin 14 is the positive input for a single cell lithium (lion/lipo) battery.  Data sheet lists max input of 7V so you could use other battery combinations/chemistries if you like, but the internal circuitry will protect based on a single cell lithium.

Pin 16 is for a temperature sensor used for battery charging.  From the data sheet:
Temperature sense input. Connect to NTC thermistor to sense battery temperature. Works with 10k and 100k thermistors.  


I attached a snapshot showing the battery charge/temp sense circuit.


On Friday, November 10, 2017 at 8:54:53 AM UTC-8, Graham wrote:
P2 pins 14 and 16 ?

--

On Friday, November 10, 2017 at 12:15:05 AM UTC-6, Shannon Mackey wrote:

I expect I'm overlooking something, But it isn't obvious to me how to power the PocketBeagle with batteries.  It doesn't have a similar arrangement to BBB.  Can someone point me in the right direction, please?  Thanks!

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/PQCNhmeBK3M/unsubscribe.
To unsubscribe from this group and all its topics, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d8a3a3dc-4327-4792-a1bd-e20831339330%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5a05eb28.dd16c80a.1ed58.9c51%40mx.google.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to