Hi, I'm currently evaluating if an existing BBB-design can be used on the new PocketBeagle but have some troubles assigning the different signals on connector to each other.
I know the BBB Expansion Header pinout from https://elinux.org/Beagleboard:Cape_Expansion_Headers and already found some similar for the PocketBeagle at https://raw.githubusercontent.com/wiki/beagleboard/pocketbeagle/images/PocketBeagle_pinout.png I could identify some of the signals but have troubles with the GPIOs. For BBB they are named GPIOb_p where "b" is the GPIO-"bank" and "p" then pin number. For the PocketBeagle they are just numbered in range 2..117. So my question: is there an assignment between these pin numbers available where one can find out which PocketBeagle GPIOs belong to which AM3358 GPIO signals? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/705e8b75-dffe-4c5c-aafc-16f96837061a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
