Hi, Little heads-up: I just spent an hour or so to realize that the simple 'CS' (ChipSelect) printed on the silkscreen for SPI1 bus on the PocketBeagle is not CS0 as I expected, but CS1. So this is actually bus /dev/spidev2.1
Not sure if this was intended, but if it is, it should probably be marked on the silk-screen as CS1 to avoid future confusion; I can send a pull request for the board (in general, even CS0 should be marked as such) If it is _not_ intended, the am335x-pocketbeagle.dts would need to be changed before capes start assuming this is CS1 (around line 389 Jason). Cheers, Henner. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f36146e8-08d6-44e0-93cb-88b2258a380b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
