On Mon, Oct 2, 2017 at 2:25 PM, <[email protected]> wrote: > Hi > > > I am using BBB for first time. I was trying to boot Beaglebone black rev c > using micro SD card. > > first i changed this > > ##enable BBB: eMMC Flasher: > > #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh > > to this > > ##enable BBB: eMMC Flasher: > > cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh > > then > > I flashed latest debian image on SD card. > > later i inserted SD card into the board then applied power through USB while > pressing boot button(>10 sec). only two LED was blinking for more then 2 > hrs. so i disconnected the USB and again connected to my PC(without SD card > in it). now my board is not detected by my PC. once again i tried to boot > using SD card by pressing boot button by applying power, now my PC is > detecting the board.( when card is in board, pc is detecting the board).
Download this image: https://rcn-ee.net/rootfs/bb.org/testing/2017-10-01/stretch-lxqt/BBB-blank-debian-9.1-lxqt-armhf-2017-10-01-4gb.img.xz Use this tool: https://etcher.io/ To write the image to an microSD card. Insert microSD into BBB, power up.. Let it flash, should take 5-10 minutes at max.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYh%3DWRza4XLf7eindh6bhfv%2Bd_Qaja2Kct-FXAQBhXfe7g%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
