Hi,
I started Reading about dts files a few days ago and wrote my own to set
P8.42, P8.43, P8.44 and P8.46 as gpio outputs. I compiled it and tried to
echo it to /sys/devices/platform/bone_capemgr/slots, but I get no response
(my terminal just stops).
Here's what I get on dmesg's last lines:
[ 407.020467] bone_capemgr bone_capemgr: part_number 'bb-gpio', version
'N/A'
[ 407.020531] bone_capemgr bone_capemgr: slot #4: override
[ 407.033061] bone_capemgr bone_capemgr: slot #4: auto loading handled by
U-Boot
And here's my custom dts:
/dts-v1/;
/plugin/;
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black";
/* identification */
part-number = "bb-gpio";
version = "00a0";
/* state the resources this cape uses */
exclusive-use =
"P8.42",
"P8.43",
"P8.44",
"P8.46",
"gpio2_11",
"gpio2_8",
"gpio2_9",
"gpio2_7";
fragment@0 {
target = <&am33xx_pinmux>;
__overlay__ {
bb_gpio_pins: pinmux_bb_gpio_pins {
pinctrl-single,pins = <
0x0b4 0x0f /* P8_42 GPIO2_11 */
0x0a8 0x0f /* P8_43 GPIO2_8 */
0x0ac 0x0f /* P8_44 GPIO2_9 */
0x0a4 0x0f /* P8_46 GPIO2_7 */
>;
};
};
};
fragment@1 {
target = <&ocp>;
__overlay__ {
bbgpio : gpio {
pinctrl-names = "default";
pinctrl-0 = <&bb_gpio_pins>;
status = "okay";
/*oe {
gpio-name = "oe";
gpio = <&gpio3 11 0x00>;
output;
};
clk {
gpio-name = "clk";
gpio = <&gpio3 8 0x00>;
output;
};
le {
gpio-name = "le";
gpio = <&gpio3 9 0x00>;
output;
};
sdi {
gpio-name = "sdi";
gpio = <&gpio3 7 0x00>;
output;
};*/
};
};
};
};
I tried upgrading kernel (right now, *uname -a* returns: Linux arm
4.9.41-ti-r53 #1 SMP PREEMPT Thu Aug 10 02:34:57 UTC 2017 armv7l
GNU/Linux), disabling audio/vídeo/wireless/adc overlays, enabling/disabling
cape_universal, loading internet dtbos (from kilobaser
<http://www.kilobaser.com/blog/2014-07-28-beaglebone-black-devicetreeoverlay-generator>and
bbbadventures <http://bbbadventures.blogspot.com.br/2013/06/pinmuxing.html>)
and default ones (like cape-universaln) and changing boards (I have 2 BBBs)
and installing bb-cape-overlays through apt-get
I think I'm missing something really stupid, because I found nothing
regarding this kind of error so far.
If I try to load the dtbos on boot through uEnv.txt, my board stops with
the 4 user leds lit, which I understand as a signal that my BBB is not
loading the OS. Of course, I can't ssh it.
What am I missing?
Best regards,
Marco
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/d7b3a25d-e723-4fa2-ab46-2eb014a10bbe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
