Hi! I'm installing a real-time clock (RTC) on Beaglbone Black and I'm seeing divergent information abount hardware of the DS1307 integrated circuit, that operates at 5V voltage, while the I2C IO buses of the BeagleBone operate at 3.3V.
In the Adafruit RTC, they indicate removing the SCL and SDA resistors from the DS1305 kit as shown here: https://learn.adafruit.com/adding-a-real-time-clock-to-beaglebone-black/wiring-the -rtc In linux.org, nothing is reported about the resistors and there are other places that also do not say anything about the resistors: http://elinux.org/Adafruit:_RTC_DS1307 *Question*: Should I keep the SCL and SDA resistors? Or should I remove the resistors? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3e5c2f95-d7d4-47e6-9fd9-6c027792386f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
