On Sat, Apr 29, 2017 at 6:18 AM, Andrea Rondini <[email protected] > wrote:
> But we have to depauperate RJ45, USB and uSD because we no need them and > we need to insert in the second modular board. > OK, but you still haven't explained why you're trying to do all those things, so it's hard to give you good advice. Are the connectors in the wrong location? You could use patch cables and panel connectors to relocate them, in a way that is actually supported by the design of the signaling they carry (Ethernet or USB). Are the connectors physically too large and/or in the way of your mechanical layout? Just unsoldering them, and carrying the signaling over some random collection of 0.1in through-hole connectors and jumper wires is likely to damage the integrity of the signals, and probably won't work reliably. It's just not something that looks attractive to a large group of BBB users, so it probably falls to you to experiment---unsolder the connectors you are interested in, and try them with makeshift daughterboards and/or jumpers. If you can show that it works and is useful, you'll have a better chance of persuading others to work with you. BTW, when you say 'depauperate', do you mean 'depopulate'? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAC%3D1GgE%2BuXGqqQXvD-ncGwURavDiCNvZhS6WUUUv0%3DExwYqAWA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
