Thanks William, I will have a look at it a bit more. I was hoping someone out there already had a piece of software that could be used and or modified. As I said I'm not a programmer. Further investigation required. Ian
On Thursday, 20 April 2017 08:17:48 UTC+10, Ian Tulley wrote: > > Hi all, first off, I'm not a programmer so the reason for this question. I > want to see if there is already a BBB application to allow it to be used > for telemetry and or could be modified for what I need. > > I am able to supply an interface board that can go from the headers of the > BBB to do all the necessary level changes so as not to "destroy" the board > by over voltage inputs etc. > This is what I need to do. > > Analogue > DC Voltage measurements in the ranges of 9-15V and 44-55V (multiple inputs) > DC Amperage measurements in the ranges of 2-20A and 40-60A (multiple > inputs) > Temperature input (multiple) > > Digital In > Again multiple inputs for an On or Off state > > Digital Out > Multiple out for switching relays, depending on both Analogue and Digital > input levels. > > Be able to display the measurements and some control of outputs etc via a > Web Page. > > Hoping someone can help > > Regards > Ian > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/68195928-98b5-4e9d-bbc9-4ef50b8df567%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
