On Wed, Feb 8, 2017 at 2:10 PM, acheesehead <[email protected]> wrote:
> I built Linux RT for a custom board based upon Beagleboard xM exactly as in
> Robert C. Nelson's page https://eewiki.net/display/linuxonarm/BeagleBoard.
>
> Here is what I get during boot, tried on a real Beagleboard xM and get the
> same behavior. The booting stops at a u-boot prompt.
>
> U-Boot SPL 2017.03-rc1-dirty (Feb 04 2017 - 12:10:18)
> Trying to boot from MMC1
> SPL: Please implement spl_start_uboot() for your board
> SPL: Direct Linux boot not active!
> reading u-boot.img
> reading u-boot.img
>
>
> U-Boot 2017.03-rc1-dirty (Feb 04 2017 - 12:10:18 -0700)
>
> OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
> OMAP3 Beagle board + LPDDR/NAND
> I2C:   ready
> DRAM:  512 MiB
> NAND:  0 MiB
> MMC:   OMAP SD/MMC: 0
> *** Warning - readenv() failed, using default environment
>
> Beagle xM Rev C
> No EEPROM on expansion board
> No EEPROM on expansion board
> OMAP die ID: 101000229ff80000016830c319017022
> Net:   usb_ether
> Error: usb_ether address not set.
>
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> switch to partitions #0, OK
> mmc0 is current device
> SD/MMC found on device 0
> Checking for: /uEnv.txt ...
> Checking for: /boot/uEnv.txt ...
> 26 bytes read in 7 ms (2.9 KiB/s)
> Loaded environment from /boot/uEnv.txt
> Checking if uname_r is set in /boot/uEnv.txt...
> Running uname_boot ...
> ** Invalid partition 3 **
> ** Invalid partition 4 **
> ** Invalid partition 5 **
> ** Invalid partition 6 **
> ** Invalid partition 7 **

Please share your "/boot/uEnv.txt"

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYhPsFhONnBb0d4MXhQfqkCCJoSaMGJ4c%2BEf5Xa8W76JPA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to