We have a board based upon the Beagleboard xM rev. C. We have been running QNX on it. We are trying to experiment with RT Linux by following the instructions at https://eewiki.net/display/linuxonarm/BeagleBoard and the kernel builds fine. We have a problem with the gpios that identify the board revision, since we do not have these gpios wired. I modified u-boot/board/ti/beagle/beagle.c to return revision=2 in get_board_revision. But when I compile u-boot, I get an error of
/home/users/staff/tpeterson/work/epic2-rt-linux/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram' /home/users/staff/tpeterson/work/epic2-rt-linux/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 2848 bytes scripts/Makefile.spl:290: recipe for target 'spl/u-boot-spl' failed Not sure where to fix this. I also could not find anything in the kernel source that is the equivalent get_board_revision call. Any help is greatly appreciated. -- John 3:16 IN GOD WE TRUST!!! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAMSLvQy2_XuABhVJHm_Hb2HRA%3DKctwJXH_YO%3D_Hs%2BNHQdd0rwQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
