Unfortunately that crashes the system..... all four blue leds on.... I will try and reflash from mem card. H
On 29 January 2017 at 21:13, Robert Nelson <[email protected]> wrote: > On Sun, Jan 29, 2017 at 2:04 PM, Harke Smits <[email protected]> wrote: > > Hello Robert, > > > > Thanks for your reaction. I understand /dev/ttyOx has been replaced by > > /dev/ttySx (x from 0-5). However the rest is far beyond my level of > skill. I > > do not know what dt overlay I load. I just flashed the latest Debian > > version. And then updated all (sudo apt-get update). I do not understand > C, > > just a bit of Python. I need to use the UARTs 2 and 4. and of course a > > number of I/O bits. I hope that is still the same? I can and are > prepared to > > move to the latest versions, just need to know what to do.... > > btw, you can also just do: > > cd /opt/scripts/tools/ > git pull > sudo ./update_kernel.sh --bone-channel --stable > sudo reboot > > and then you can return to the classic 3.8.13 based kernel you are use > too.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHmciabCvHYP4FxDHO0550Tyapb0qwZKMeiTOx5hgMdOtpwZNA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
