We've recently found a strange problem. Repeatable across all eleven boards we've tried so far.
When pin 32 on P8 (gpoi0[11]) is pulled high via a resistor on boot, the clock on the BBB runs ~7000 seconds slow a day. (~5 seconds a minute) If the pin is pulled low or left floating on boot, the clock keeps time. The device tree overlay was set to 0x37 for this pin - fast slew, output, pullup, mode 7, but changing this has no effect. We were using Debian 7.9 with various programs installed, a few device tree overlays applied and a custom cape when we noticed this, but it's still the case using the Debian 8.6 image with no modifications, no dto and no cape. We haven't been able to find anything online and don't really know where to start looking. Any ideas? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e0647cb0-ac27-44ed-a11b-a6f71b7ef077%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
