supply 3.3v to the beaglebone? you are only supposed to supply 5v to the beaglebone
i would look there for starters On 11/28/2016 8:26 PM, Matthew Collier wrote: > Hello, > I am currently working with the beaglebone black running on board eMMC > flash with Debian. I have encountered a problem with the beaglebone > resetting randomly when running programs and then wiping the > program(only because the program is not running on boot). I am using > an adafruit proto-cape as well to run several different sensors and > motors simultaneously. I am also using an external battery (2500ma > 3.3V) along with the adafruit power booster to supply 3.3V and 5V to > the beaglebone and sensors ect. I've checked the circuitry and it > doesn't seem like anything is shorting. I attached LEDs to 3V to > grounds and 5V to ground with resistors to see if the board is > shorting, which it isn't. The beaglebone will just reset at random > times. So I'm confused as to what could be causing the reset. Is this > a problem that others have had? I have attached a basic picture of the > current circuitry. If anymore information is needed to helped narrow > down the problem just let my know. Thanks in advice > > -Matt > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/f8e681bf-a000-41a0-b16b-b320b91fd695%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/f8e681bf-a000-41a0-b16b-b320b91fd695%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bb0909d1-8af2-02db-b557-5d58934ee673%40gmail.com. For more options, visit https://groups.google.com/d/optout.
