On my BeagleBoneBlack with a system installed in eMMC, I get
different device names for the MMC devices, depending on whether
or not there is a SD card installed at boot time.
With SD card installed:
MMC/SD slot = mmcblk0
eMMC = mmcblk1
Without SD card installed (at boot):
MMC/SD slot = mmcblk1 if inserted after boot
eMMC = mmcblk0
Is there some way to configure this to be consistent? i.e.
MMC/SD slot = mmcblk0 (regardless of the presence of an SD card)
eMMC = mmcblk1
which matches the device enumeration in U-Boot?
If not, what's the rationale behind the madness?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/c854487f-8781-3da2-41bd-79d728445455%40mlbassoc.com.
For more options, visit https://groups.google.com/d/optout.
