Hi people, I'm new to working with the Beagle Board and the first time experience setting it up isn't encouraging.
I'm running a MacOSX El Capitan version 10.11.16 on an early 2015 Mac book. So far I have followed the instructions on the getting started webpage for the BeagleBoard and installed the drivers listed in this page http://www.feverlabs.org/2016/05/beaglebone-black-ssh-over-usb-on-mac-osx-el-capitan/ <http://www.feverlabs.org/2016/05/beaglebone-black-ssh-over-usb-on-mac-osx-el-capitan/>but to no avail. I still can't connect to the address http://192.168.7.2on the browser and sshing into it isn't possible. The board is picked up as AM335x USB in the network settings in OSX as seen in the screenshot below: <https://lh3.googleusercontent.com/-ArwK0hsq96Q/V-Z-kK6xUqI/AAAAAAAAB3I/jfhkBMGv13sIGzVfa_cPDgxbaiZenTKcgCLcB/s1600/Screen%2BShot%2B2016-09-24%2Bat%2B4.24.07%2BPM.png> Another blog I visited suggested I enter DHCP manually and setting it to 192.168.7.2 to solve the self-assigned ip issue. This makes AM335x USB turn green and say connected, but when you attempt to visit the ip on the browser it fails and sshing doesn't work either. I'd like the community to help me understand what I'm doing wrong and if I've missed anything. Thanks in Advance. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7057f3a8-17a5-44bc-9be1-cca97e3dda6f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
