So as the subject says we're having issues with gpio1_16 and gpio2_0 being tied together through r161. We've removed r161 on one beaglebone green, then export gpio48(gpio1_16) through sysfs, set the direction to 'in', in an attempt to read input to an externally connected sensor. This does not work. However, as soon as we swap the BBG out for a BBB, the software we have reading the input pins works perfectly.
So my question is this: Is there some sort of software binding through the initial boot board device tree file between these two pins that also needs to be changed ? Instead of or including removing r161 ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/69c9a3a9-38a3-4145-94e4-836bb5bfc711%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
