On Tue, Jul 19, 2016 at 10:58 AM Jason Kridner <[email protected]> wrote:
> On Tue, Jul 19, 2016 at 9:37 AM Robert Nelson <[email protected]> > wrote: > >> Hi Steve, >> >> On Tue, Jul 19, 2016 at 5:00 AM, Steve Osselton < >> [email protected]> wrote: >> >>> Hi, >>> >>> When updating the TI kernel from 4.4.14-ti-r34 to 4.4.15-ti-r35 on >>> Debian 8.5, the kernel failed to >>> boot cleanly. On connecting a console, the boot process failed in >>> initramfs when trying to mount the >>> real boot partition (the eMMC). The mount command from initramfs was >>> complaining about invalid >>> parameters. Any idea about what is causing this? Edited uEnv.txt to >>> refer to the older kernel and >>> re-booted ok, so was fixable. >>> >> >> Sigh, yeah it's broken on my bbb too... >> >> with r34, i was chasing why the uuid=<> option was failing to find the >> microSD card on the x15, i fixed that and pushed as r35.. >> > > Mainline u-boot seems to use a 'blkid' command to set the UUID. Does that > work for X15? > > >> >> Then with r35, i noticed the eMMC on x15 had regressed (while the microSD >> was working), which i fixed in r36, by pulling the patch from 4.5.x to hard >> code microSD=mmc0, eMMC=mmc1... >> >> and now the bbb is broken.. blah... >> > > FYI, it seems to have also broken WL1835 wifi over SDIO (mmc2). > OK, that wasn't the issue. ti-rt-r36 still fails with WL1835. Useful debug output: Jul 19 15:12:08 beaglebone kernel: omap_hsmmc 47810000.mmc: card claims to support voltages below defined range . . . Jul 19 15:12:08 beaglebone kernel: mmc2: error -16 whilst initialising SDIO card > >> >> So, i'll revert back to r34, but leave the 4.5.x hardcode in place for >> the x15. ;) >> > > I'll be looking for the build! > > >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/CAOCHtYi2%2B1GL_dBLySwAAgnd4bnOyot8i4njZe5UKmbqpRqMMQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/beagleboard/CAOCHtYi2%2B1GL_dBLySwAAgnd4bnOyot8i4njZe5UKmbqpRqMMQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2BT6QPnY39c%3Dei5ugQ4tkx4S1PYHCAai2eyhhM%2BRPrFJc32V8g%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
