> thanks, unfortunately with this i can only adjust the resolution and frame rate. In contrast with the possibility at raspberrys > config.txt is this not really much.
No, "60e" I'm 99% sure has to do with refresh rate( frequency ). Frames per second has nothing to do with setting up a monitor . . . > So i think about v-porch, h-porch, de-mode, frequency etc...? > Is there a easy way to config this? Or how can make my own Edid directly on the bbb... (not with eeprom) You could always download the support files for a known working / well respected LCD screen, and pour over the information . . . Either that or do a google search for "linux how to edid config" On Sat, Jun 18, 2016 at 10:19 AM, epi kao <[email protected]> wrote: > Am Samstag, 18. Juni 2016 18:58:32 UTC+2 schrieb William Hermans: > > I'm pretty sure( as I've seen it demonstrated a few times ) that there > is a kernel config option to change the video output resolution. So here . > . . > > > > $ cat /boot/uEnv.txt |grep cmdline > > #cmdline=coherent_pool=1M quiet cape_universal=enable > > cmdline=ipv6.disable=1 > > #cmdline=coherent_pool=1M quiet cape_universal=enable > video=HDMI-A-1:1024x768@60e > > #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh > > > > I'm afraid I do not know much more than that however. > > > > > > > > > > > > On Sat, Jun 18, 2016 at 9:04 AM, epi kao <[email protected]> wrote: > > Hello all > > > > > > > > where can i disable the edid from hdmi? > > > > and where can i setup my own edid on the bbb? > > > > > > > > (i have several small TFT's which has no edid-possibility) > > > > > > > > @raspberry i can simply change a config.txt file for this. > > > > > > > > thanks > > > > > > > > -- > > > > For more options, visit http://beagleboard.org/discuss > > > > --- > > > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/e558d70f-e38a-462d-92a4-9e6897bad8b9%40googlegroups.com > . > > > > For more options, visit https://groups.google.com/d/optout. > > thanks, unfortunately with this i can only adjust the resolution and frame > rate. In contrast with the possibility at raspberrys config.txt is this not > really much. > > So i think about v-porch, h-porch, de-mode, frequency etc...? > Is there a easy way to config this? Or how can make my own Edid directly > on the bbb... (not with eeprom) > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/f53e6ff4-04d3-40ef-a54e-c937a62dab55%40googlegroups.com > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORoGOr5PWrTNQWTu1swHt8MqaNQaKLUWwRH-gd646zQChw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
