Hi, I have been using BBB for a while now and have developed embedded applications using it. This morning when I was working with my BBB, something strange happened, I powered my BBB and when I was about to SSH to the BBB, suddenly it just switched off. Then I unplugged and plugged in the adapter and saw that, the BBB does not power up while the power LED just blinks once and goes off. Then I tried to power my BBB through the USB and the same thing happens again i.e. Power LED flashes ones and then the BBB not responding while powered off.
Has this happened to anyone else?, After researching online, It says here Beagleboard:BeagleBoneBlack - eLinux.org <https://www.element14.com/community/external-link.jspa?url=http%3A%2F%2Felinux.org%2FBeagleboard%3ABeagleBoneBlack%23Improper_Power_Down....All_Revisions> its issue with PMIC due to high current intake, but I don't understand what I did for the BBB to draw high currents. I am using BBB Rev C. Please help?. Can I power up the BBB from an adapter by connecting the adapters positive to P9_05 (VDD) and negative to GND of BBB?? Regards Vinay Divakar -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b7d107ea-b896-4578-8ca5-73417a5bda46%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
