I’m back and up and running with my new serial debug cable.
Maybe you can help me understand this.
I have 2 BBB’s one Original BBB and an Arrow industrial temperature BBB.
Both were flashed from the same microSD card image.
Original BBB has new u-boot on it and will boot successfully. (see below
Boot Log Original new u-boot.txt)
Then I connected to the new Arrow BBB before loading the new u-boot. It
boots OK. (see Boot Log Arrow BBB old u-boot.txt)
Then I loaded the same new u-boot on the Arrow BBB and now it will not
complete the boot. (see Boot Log Arrow BBB new u-boot.txt)
The | character at the end of this boot log file was a rotating line
pattern that continued forever like it is waiting for something. All the
BBB blue LED’s are on.
I really appreciate you taking the time to look at this,
Kirk
**********************************************************
********** Boot Log Original new u-boot.txt **************
**********************************************************
U-Boot SPL 2015.10-00002-gec579ac-dirty (May 05 2016 - 11:39:07)
bad magic
U-Boot 2015.10-00002-gec579ac-dirty (May 05 2016 - 11:39:07 -0500)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1013 bytes read in 14 ms (70.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-3.8.13-bone70 ...
5617184 bytes read in 326 ms (16.4 MiB/s)
loading /boot/dtbs/3.8.13-bone70/am335x-boneblack.dtb ...
26098 bytes read in 22 ms (1.1 MiB/s)
loading /boot/initrd.img-3.8.13-bone70 ...
2865938 bytes read in 174 ms (15.7 MiB/s)
debug: [console=ttyO0,115200n8 text
capemgr.disable_partno=BB-BONELT-HDMI,BB-BON
ELT-HDMIN root=UUID=9579490e-1d99-4afc-89f6-496ad41aef7a ro
rootfstype=ext4 root wait quiet
init=/lib/systemd/systemd] ...
debug: [bootz 0x82000000 0x88080000:2bbb12 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x55b620 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fd44000, end 8ffffb12 ... OK
Loading Device Tree to 8fd3a000, end 8fd435f1 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.372834] omap2_mbox_probe: platform not supported
[ 0.527766] tps65217-bl tps65217-bl: no platform data provided
[ 0.591300] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 0.628407] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.665515] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.702625] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.721297] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset'
failed
[ 0.782963] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by 44e10800.pinmux;
cannot claim for gpio-leds.8
[ 0.794660] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status
-22
[ 0.801933] pinctrl-single 44e10800.pinmux: could not request pin 21 on
devic e pinctrl-single
Loading, please wait...
systemd-fsck[205]: rootfs: clean, 112865/227584 files, 658849/909056 blocks
Debian GNU/Linux 7 beaglebone ttyO0
BeagleBoard.org Debian Image 2015-03-01
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
default username:password is [debian:temppwd]
The IP Address for usb0 is: 192.168.7.2
beaglebone login:
***********************************************************
********** Boot Log Arrow BBB old u-boot.txt *************
***********************************************************
U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)
U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build:
jenkins-github_Bootloader-Builder-105
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1336 bytes read in 24 ms (53.7 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-3.8.13-bone70 ...
5617184 bytes read in 336 ms (15.9 MiB/s)
loading /boot/dtbs/3.8.13-bone70/am335x-boneblack.dtb ...
26098 bytes read in 30 ms (848.6 KiB/s)
loading /boot/initrd.img-3.8.13-bone70 ...
2852057 bytes read in 183 ms (14.9 MiB/s)
debug: [console=ttyO0,115200n8 text
capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
root=UUID=2c8df339-3bf8-4de5-8a31-d8c69c096d6d ro rootfstype=ext4 rootwait
fixrtc quiet init=/lib/systemd/systemd] ...
debug: [bootz 0x82000000 0x88080000:2b84d9 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x55b620 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fd47000, end 8ffff4d9 ... OK
Loading Device Tree to 8fd3d000, end 8fd465f1 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.371739] omap2_mbox_probe: platform not supported
[ 0.526897] tps65217-bl tps65217-bl: no platform data provided
[ 0.589296] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 0.626401] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.663509] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.700619] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.719289] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset'
failed
[ 0.780964] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.792645] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status
-22
[ 0.799927] pinctrl-single 44e10800.pinmux: could not request pin 21 on
device pinctrl-single
Loading, please wait...
systemd-fsck[206]: rootfs: clean, 112847/224896 files, 711253/898816 blocks
Debian GNU/Linux 7 beaglebone ttyO0
BeagleBoard.org Debian Image 2015-03-01
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
default username:password is [debian:temppwd]
The IP Address for usb0 is: 192.168.7.2
beaglebone login:
***********************************************************
********** Boot Log Arrow BBB new u-boot.txt **************
***********************************************************
U-Boot SPL 2015.10-00002-gec579ac-dirty (May 05 2016 - 11:39:07)
bad magic
U-Boot 2015.10-00002-gec579ac-dirty (May 05 2016 - 11:39:07 -0500)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
Phy 0 not found
cpsw
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1336 bytes read in 26 ms (49.8 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-3.8.13-bone70 ...
5617184 bytes read in 338 ms (15.8 MiB/s)
unable to find [dtb=am335x-abbbi.dtb] did you name it correctly? ...
FAILSAFE: U-Boot UMS (USB Mass Storage) enabled, media now available over
the usb slave port ...
UMS: disk start sector: 0x0, count: 0x70c000
|
On Thursday, May 5, 2016 at 10:43:21 AM UTC-7, RobertCNelson wrote:
>
>
>
> On Thu, May 5, 2016 at 12:37 PM, <[email protected] <javascript:>>
> wrote:
>
>> So it looks like I have get a serial cable??
>>
>> Or is the bootloader log written to a file somewhere. I can't find it.
>> (it does boot up most of the time)
>>
>
> it get's written on bootup to the serial port..
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/87095bad-e3eb-4782-9e1c-811274bde297%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
