I have 2 boards that I've been testing on that give the same results. One
is a A5C 2 GB board (?) and the other is a 0C0 4 GB board (Element14). I'm
not using any capes, just the bare board.
I've been comparing 3.14 and 4.x code, but have not found any key
differences other than code moving around from refactoring. I've tried
looking at device tree stuff also, but I don't have the hardware background
to fully understand most of that.
In addition to trying rtcwake, I've also tried "echo mem >
/sys/power/state" after setting a wakealarm through /sys and also trying to
use the serial console as wakeup sources... I get the same frozen system
with 4.x TI kernels. BUT, the system does respond to pushing the reset
button to reboot from the "frozen" state.
/sys/class/rtc/rtc0/device/power/wakeup <-- 3.14 is enabled
/sys/class/rtc/rtc0/device/power/wakeup <-- 4.x is enabled
When trying a mem sleep on 4.x kernels, user LED's 1 and 3 remain lit in
the "frozen" state
strace results for rtcwake on 3.14 TI kernel...
root@beaglebone:~# tail test.txt
sync() = 0
open("/sys/power/state", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0xb6f8c000
write(4, "mem\n", 4) = 4
close(4) = 0
munmap(0xb6f8c000, 4096) = 0
ioctl(3, PHN_GET_REGS or RTC_AIE_OFF, 0) = 0
close(3) = 0
exit_group(0) = ?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/b182222c-e834-46bd-8acf-f3058f818285%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
