You add "g_ether" to /etc/modules. Standard Debian procedure . . .
On Sun, Apr 3, 2016 at 3:52 PM, 'Juergen' via BeagleBoard < [email protected]> wrote: > > I'm running a BeagleBone Black with Debian, 3.8.13-bone63. DCAN1 is > enabled. > > Some (long) time ago I've disabled the Ethernet over USB0. Because I'm > fairly new in Linux, I can't remember how. To re-enable it I've uncomment > the corresponding settings in /etc/network/interfaces to > > # Ethernet/RNDIS gadget (g_ether) > # ... or on host side, usbnet and random hwaddr > # Note on some boards, usb0 is automaticly setup with an init script > iface usb0 inet static > address 192.168.7.2 > netmask 255.255.255.0 > network 192.168.7.0 > gateway 192.168.7.1 > > After rebooting and "ifconfig -a" there is no "usb0". After that i've > added "/lib/modules/3.8.13-bone63/kernel/drivers/usb/gadget/g_ether.ko" > to "/etc/modules" > > After reboot there is again no "usb0". After "modprobe g_ether" and > "/etc/init.d/networking > restart", I can find "usb0" with "ifconfig". > > > How can I do it, that the Ethernet over usb0 will automatically > load/starts again during startup. > > Thanks! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
