On Tue, Aug 25, 2015 at 8:52 AM, Fohnbit <[email protected]> wrote: > Hi Robert! > > The Log output is: > <\n>U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)<\r> > <\n><\n><\r> > <\n><\r> > U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: > jenkins-github_Bootloader-Builder-105<\n><\r> > <\n><\r> > Watchdog enabled<\n><\r> > I2C: ready<\n><\r> > DRAM: 512 MiB<\n><\r> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1<\n><\r> > Using default environment<\n><\r> > <\n><\r> > Net: <ethaddr> not set. Validating first E-fuse MAC<\n><\r> > cpsw<\n><\r> > Hit any key to stop autoboot: 1 <\b><\b><\b> 0 <\n><\r> > gpio: pin 53 (gpio 53) value is 1<\n><\r> > switch to partitions #0, OK<\n><\r> > mmc0 is current device<\n><\r> > gpio: pin 54 (gpio 54) value is 1<\n><\r> > Checking for: /uEnv.txt ...<\n><\r> > Checking for: /boot.scr ...<\n><\r> > Checking for: /boot/boot.scr ...<\n><\r> > Checking for: /boot/uEnv.txt ...<\n><\r> > gpio: pin 55 (gpio 55) value is 1<\n><\r> > 817 bytes read in 22 ms (36.1 KiB/s)<\n><\r> > Loaded environment from /boot/uEnv.txt<\n><\r> > Checking if uname_r is set in /boot/uEnv.txt...<\n><\r> > gpio: pin 56 (gpio 56) value is 1<\n><\r> > Running uname_boot ...<\n><\r> > loading /boot/vmlinuz-3.8.13-bone70 ...<\n><\r> > 5617184 bytes read in 336 ms (15.9 MiB/s)<\n><\r> > loading /boot/dtbs/3.8.13-bone70/am335x-boneblack.dtb ...<\n><\r> > 26098 bytes read in 32 ms (795.9 KiB/s)<\n><\r> > loading /boot/initrd.img-3.8.13-bone70 ...<\n><\r> > 2867214 bytes read in 184 ms (14.9 MiB/s)<\n><\r> > debug: [console=ttyO0,115200n8 > capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN > root=UUID=319a7dc6-9ece-408a-877f-f7c38bebb825 ro rootfstype=ext4 rootwait > fixrtc quiet init=/lib/systemd/systemd] ...<\n><\r> > debug: [bootz 0x82000000 0x88080000:2bc00e 0x88000000] ...<\n><\r> > Kernel image @ 0x82000000 [ 0x000000 - 0x55b620 ]<\n><\r> > ## Flattened Device Tree blob at 88000000<\n><\r> > Booting using the fdt blob at 0x88000000<\n><\r> > Loading Ramdisk to 8fd43000, end 8ffff00e ... OK<\n><\r> > Loading Device Tree to 8fd39000, end 8fd425f1 ... OK<\n><\r> > <\n><\r> > Starting kernel ...<\n><\r> > <\n><\r> > Uncompressing Linux... done, booting the kernel.<\r> > <\n>[ 0.373011] omap2_mbox_probe: platform not supported<\r> > <\n>[ 0.527892] tps65217-bl tps65217-bl: no platform data provided<\r> > <\n>[ 0.591231] bone-capemgr bone_capemgr.9: slot #0: No cape found<\r> > <\n>[ 0.628338] bone-capemgr bone_capemgr.9: slot #1: No cape found<\r> > <\n>[ 0.665447] bone-capemgr bone_capemgr.9: slot #2: No cape found<\r> > <\n>[ 0.702556] bone-capemgr bone_capemgr.9: slot #3: No cape found<\r> > <\n>[ 0.721167] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' > failed<\r> > <\n>[ 0.782909] pinctrl-single 44e10800.pinmux: pin 44e10854 already > requested by 44e10800.pinmux; cannot claim for gpio-leds.8<\r> > <\n>[ 0.794575] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) > status -22<\r> > <\n>[ 0.801852] pinctrl-single 44e10800.pinmux: could not request pin 21 > on device pinctrl-single<\r> > <\n>Loading, please wait...<\r> > <\n>systemd-fsck[207]: rootfs: clean, 86289/233856 files, 569921/933632 > blocks<\r> > <\n>[ 5.846980] libphy: PHY 4a101000.mdio:01 not found<\r> > <\n>[ 5.852071] net eth0: phy 4a101000.mdio:01 not found on slave 1<\r> > <\n><\r> > <\n>Musik 7 musik ttyO0<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>172.17.17.2<\r> > <\n>The IP Address for eth0 is: 192.168.0.142<\r> > <\n>musik login: > > Is there anything you can read?
Well, so what exactly is the problem? Looks like it booted just fine ^^.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
