OK, I'll try GCC version! Just wanted to collect some information regarding both compilers in this thread...
2014-11-04 17:47 GMT+01:00 <[email protected]>: > Hi Karl, > > The PRU GAS and LD ports should be in a good shape. But the PRU GCC port > has not yet reached beta. Judge for yourself: > > - PRU GCC has not been "battle tested" on a big project. > - Only two small examples are currently used to "sanity check" the pru > gcc releases. > - PRU GCC has no known bugs. > > If you can take a little risk and don't mind checking the > compiler-generated assembler, then go ahead and try PRU GCC. > > If you want an "ASAP, no hassles" C compiler for PRU, TI's one would be a > more suitable choice right now. > > Regards, > Dimitar > > > On Tuesday, November 4, 2014 2:11:23 PM UTC+2, Karl Karpfen wrote: >> >> Hi, >> >> it seems there are two C-compilers available that are able to generate >> PRU-code. One from TI and one introduced here in this board. But...which >> one is recommended to be used? That's what I found out so far, may be >> somebody can add some missing information to make it easier to choose one: >> >> TI's PRU-C-compiler is >> >> - available at http://software-dl.ti.com/codegen/non-esd/downloads/ >> beta.htm >> - BETA >> - can be used to create ARM-objects (which can be linked to a bare metal >> application and loaded to PRU on start-up automatically?) >> >> Community/Open Source PRU-C-compiler is >> >> - avaialble at https://github.com/dinuxbg/gnupru >> - BETA >> - GCC-based and therefore more stable >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/rwNrqudk0Ug/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
