Hi, I've been trying to setup my cross-compile tool chain for programming on the BBB through a Linux Mint box with Eclipse running in VMPlayer. So far I've been able to configure almost all the needed components properly to cross-compile and deploy using g++-4.8-arm-linux-gnueabihf (for some reason the non 'hf' version doesn't work-- I admit I am still trying to differentiate between the various flavors of arm out there that are represented by the compilers).
However, I can't seem to quite get/find a cross-complied version of the SDL lib (I know SDL2) doesn't work on the BBB. I found this <http://how-to-build-for-arm.wikispaces.com/sdl> page with some instructions, but it doesn't seem to work quite right for me either. Further, I know there is a version of SDL 1.2 that can be apt-get from the BBB itself-- but of course this doesn't help when wanting to try to cross-compile rather than compile directly on the BBB. Lastly, though I've been able to find some rather easy/straight forward instructions for the Raspberry Pi <http://www.raspberrypi.org/forums/viewtopic.php?f=67&t=39667>, I can't seem to find anything comparable for the Debian version of BB. Does anyone happen to have any recommendations or suggestions? Thanks- -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
