I think I've updated both. Since I'm booting off the SD card, doesn't /dev/mmcblk0p0 refer to the SD card and /dev/mmcblk1p0 refer to the eMMc?
I've even tried holding down the S2 button to force it to boot off of the SD card and I'm still getting the original u-boot. I thought I had a nice exercise for my students, but it has me stumped. --Mark On Friday, October 17, 2014 2:39:53 PM UTC-4, RobertCNelson wrote: > > On Fri, Oct 17, 2014 at 1:37 PM, Mark A. Yoder <[email protected] > <javascript:>> wrote: > > Well, I must be doing something wrong. I've runn your suggested dd > commands > > and I've try shutting the Bone down and dd'ing straight to the SD card, > but > > it appears I'm always running the same u-boot. > > Remember there's two media devices.. > > microSD & eMMC > > So if you only update the microSD, the eMMC's mlo/u-boot.img still get > priority > > > Do you have any ideas what might keep u-boot from updating? > > PS, you can dd it to the partition while the system is active, I've > been doing that for awhile with i.mx5/6 boards with no issues.. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
