Does it have to be a 10" or would a 7" do the trick. The screens from 4D systems work out of the box and at $89 are very affordable. Adafruit also has this listed under their BBB products which should imply that it works http://www.adafruit.com/products/1287.
On Mon, Sep 15, 2014 at 8:12 AM, <[email protected]> wrote: > > Hi, > > For a project I need a beaglebone and a 10 inch Touch lcd screen. But > that isn't that easy as it sounds. > I did buy a lcd cap. But they only work with there own distribution. A > embedded HDMI touch monitor is (almost) impossible to source. It needs to > be build in a frame. > > So I 'm only solution is a LVDS LCD touch screen and a HDMI LVDS > converter. > But I didn 't find a good source for HDMI LVDS converter so I have to > make my own. > > So am I missing something, is there no easy way to connect a Touch LCD > module on a beaglebone that works with a standard linux distribution? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
