Update: I received my new BBB - a CurcuitCo version from Adafruit on Tuesday. On Wednesday I got it set up almost identical to the other one I sent back. It has 3.14.17-bone8 kernel. It rebooted/reset on Thursday at 2:15am and the physical ethernet port was down, so I had to connect via the USB port to look at syslog and see what happened. There is no entry for reboot or shutdown so it looks like a complete reset is taking place. Logs show ethernet port not coming up and dhcpclient says network unreachable
I did a power down and restart and it ran fine until Friday morning and reset twice at 7:35am and almost immediately again at 7:50am. Both times it looks like during the boot sequence that network services are starting after ntpd as ntpd can't resolve hosts. dhcpclient can't find the network and retries about a half dozen times then the ethernet port finally comes up and it's back online. This is physically plugged into the same hub that my RasPi is plugged into (and has been running non-stop for over two weeks now, no issues with it whatsoever). I certainly can't use this BBB as a print and weather data server with it behaving this way so I'll keep these running on the RasPi until I can figure out why this is resetting constantly. Using a 5v 2a power supply and I've tried two different ones with the other BBB so I don't think it's a PS issue, but that doesn't leave much else to blame for random resets. Ideas and suggestions welcome. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
