I will consider your formal request to add the feature as that is what is expected of me. It is not a zero cost adder. You have to add a voltage divider consisting of two resistors as tying the muxout direct to the processor would blow it up.
Gerald On Tue, Aug 26, 2014 at 7:24 AM, <[email protected]> wrote: > I would not expect them to turn a new PCB just for this mod (yes I know > how much that would cost) but I would expect them to at least put it in the > que when (or if) another turn is ever done. > It is just one trace on the PCB and a zero cost adder. > It was nice the battery connections were at least brought out to test > points, unfortunately you can not do true battery operation with out access > to this information. > > > > On Thursday, August 21, 2014 2:14:53 PM UTC-4, [email protected] wrote: > >> Wouldn't have been great if the designer of the BBB hooked up the MUX OUT >> pin from the PMIC to one of the upper ADC channels on the AM335x? >> That way we could programmatically read the battery, system, AC and USB >> etc. voltage. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
