Robert, thank you very much, however the overlays are not compiling - I am pretty sure I have the latest dtc:
root@arm:/home/ubuntu/wattup/src/dts# dtc -version Version: DTC 1.4.0-gf345d9e4 + dtc -O dtb -o BB-UART2-RTSCTS-00A0.dtbo -b 0 -@ BB-UART2-RTSCTS-00A0.dts Error: BB-UART2-RTSCTS-00A0.dts:5.1-2 syntax error FATAL ERROR: Unable to parse input tree Dejan Nenov On Thursday, August 21, 2014 4:30:29 PM UTC-7, Dejan Nenov wrote: > > Hello, > > I am on a BBB with: > > Linux arm 3.8.13-bone63 #2 SMP Sat Aug 16 00:01:36 PDT 2014 armv7l armv7l > armv7l GNU/Linux > root@arm:/home/ubuntu# lsb_release -a > LSB Version: > core-2.0-armhf:core-2.0-noarch:core-3.0-armhf:core-3.0-noarch:core-3.1-armhf:core-3.1-noarch:core-3.2-armhf:core-3.2-noarch:core-4.0-armhf:core-4.0-noarch:core-4.1-armhf:core-4.1-noarch:security-4.0-armhf:security-4.0-noarch:security-4.1-armhf:security-4.1-noarch > Distributor ID: Ubuntu > Description: Ubuntu 14.04.1 LTS > Release: 14.04 > Codename: trusty > > > The .dts below work sfine when compiled, copied to /libfirmware and echo > enable-uart2 > /sys/devices/bone_capemgr.*/slots > > HOWEVER, with my /boot/uEnv.txt containing this: > > # cat /boot/uEnv.txt > uname_r=3.8.13-bone63 > #dtb= > cmdline=quiet > ###uuid=5dcad23b-fa16-4918-983f-82a6f0c02aae > #capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN > optargs=quiet drm.debug=7 capemgr.enable_partno=enable-uart2,enable-uart5 > uuid=6baebde8-2358-4f59-aced-798c4aee4cfb > > > Upon reboot in dmesg I get: > # dmesg | grep uart2 > [ 0.000000] Kernel command line: console=ttyO0,115200n8 quiet > drm.debug=7 capemgr.enable_partno=enable-uart2,enable-uart5 > root=UUID=6baebde8-2358-4f59-aced-798c4aee4cfb ro rootfstype=ext4 rootwait > fixrtc quiet > [ 0.728384] bone-capemgr bone_capemgr.9: enabled_partno part_number > 'enable-uart2', version 'N/A', prio '0' > [ 0.728426] bone-capemgr bone_capemgr.9: slot #7: 'Override Board > Name,00A0,Override Manuf,enable-uart2' > [ 0.729118] bone-capemgr bone_capemgr.9: loader: before slot-7 > enable-uart2:00A0 (prio 0) > [ 0.729131] bone-capemgr bone_capemgr.9: loader: check slot-7 > enable-uart2:00A0 (prio 0) > [ 0.732152] bone-capemgr bone_capemgr.9: loader: after slot-7 > enable-uart2:00A0 (prio 0) > [ 0.732172] bone-capemgr bone_capemgr.9: slot #7: Requesting part > number/version based 'enable-uart2-00A0.dtbo > [ 0.732188] bone-capemgr bone_capemgr.9: slot #7: Requesting firmware > 'enable-uart2-00A0.dtbo' for board-name 'Override Board Name', version > '00A0' > [ 1.043033] bone-capemgr bone_capemgr.9: failed to load firmware > 'enable-uart2-00A0.dtbo' > [ 1.051672] bone-capemgr bone_capemgr.9: loader: failed to load slot-7 > enable-uart2:00A0 (prio 0) > > > And when I then do: > echo enable-uart2 > /sys/devices/bone_capemgr.*/slots > > then all is well and dmesg says: > > [ 721.217812] bone-capemgr bone_capemgr.9: part_number 'enable-uart2', > version 'N/A' > [ 721.218087] bone-capemgr bone_capemgr.9: slot #9: 'Override Board > Name,00A0,Override Manuf,enable-uart2' > [ 721.218349] bone-capemgr bone_capemgr.9: slot #9: Requesting part > number/version based 'enable-uart2-00A0.dtbo > [ 721.218401] bone-capemgr bone_capemgr.9: slot #9: Requesting firmware > 'enable-uart2-00A0.dtbo' for board-name 'Override Board Name', version > '00A0' > [ 721.223775] bone-capemgr bone_capemgr.9: slot #9: dtbo > 'enable-uart2-00A0.dtbo' loaded; converting to live tree > > > > # cat enable-uart2-00A0.dts > /* > * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > * published by the Free Software Foundation. > */ > /dts-v1/; > /plugin/; > > / { > compatible = "ti,beaglebone", "ti,beaglebone-black"; > > /* identification */ > part-number = "uart2"; > > fragment@0 { > target = <&am33xx_pinmux>; > __overlay__ { > pinctrl_uart2: pinctrl_uart2_pins { > pinctrl-single,pins = < > 0x184 0x20 /* P9.24 uart1_txd.uasrt1_txd OUTPUT */ > 0x180 0x20 /* P9.26 uart1_rxd.uart1_rxd INPUT */ > >; > }; > }; > }; > > fragment@1{ > target = <&uart2>; > __overlay__ { > status = "okay"; > }; > }; > > fragment@2 { > target = <&ocp>; > __overlay__ { > test_helper: helper { > compatible = "bone-pinmux-helper"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_uart2>; > status = "okay"; > }; > }; > }; > }; > > > > Please advise? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
