From: Fred Fisch <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Wednesday, June 25, 2014 at 11:14 PM To: "[email protected]" <[email protected]> Subject: Re: [beagleboard] Starterware on Beaglebone
> On 23 June 2014 18:21, John Syn <[email protected]> wrote: >> >> From: <[email protected]> >> Reply-To: "[email protected]" <[email protected]> >> Date: Monday, June 23, 2014 at 2:18 AM >> To: "[email protected]" <[email protected]> >> >> Subject: Re: [beagleboard] Starterware on Beaglebone >> >>> On Wednesday, 18 June 2014 20:18:47 UTC+2, john3909 wrote: >>>> What you say is not accurate. The USB100V2 is less than $100 and is plenty >>>> fast enough. >>> >>> TI itself points to the fact that you need much patience when using >>> USB100V2. I don't know what size your application has but with a .bin file >>> above 100 kByte there is time to get a cup of coffee until .GEL file is >>> executed and firmware is loaded. >> Then you must be using a TCLK less than 10MHz. With TCLK at 10MHz, a 100kB >> image will download in seconds. > > Sounds interesting...where can one change this value (in CCS6)? > In Target Configuration. The following links should help. http://e2e.ti.com/support/microcontrollers/hercules/f/312/t/169975.aspx http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems http://processors.wiki.ti.com/index.php/Troubleshooting_CCSv6 Regards, John > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
