From: Gerald Coley <[email protected]> Reply-To: <[email protected]> Date: Thursday, May 22, 2014 at 12:25 PM To: "[email protected]" <[email protected]> Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes Once
> You should be able to just press the power button once briefly and it > shutdown. Assuming the image you are running has it. The latest image does > have it. > > After it powers down, then you can remove the power. We need to make sure the > PMIC powers down all the rails to the processor in order. Or you can enter "halt" on the console or terminal window and it will power off. Regards, John > > > Gerald > > > > On Thu, May 22, 2014 at 2:17 PM, Miroslav Rudišin <[email protected]> wrote: >> By powering down you mean either: >> - issuing power off sequence from the OS >> - holding power button for 8 seconds >> >> Or is it also good enough just disconnecting power supply from wall outlet? >> >> Thanks. >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
